set ip dns 137
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command configures the alias HR1 for IP
address 192.168.1.2:
WX4400# set ip alias HR1 192.168.1.2
success: change accepted.
See Also
■ “clear ip alias” on page 110
■ “display ip alias” on page 119
set ip dns Enables or disables DNS on a wireless LAN switch.
Syntax — set ip dns {enable | disable}
■ enable — Enables DNS.
■ disable — Disables DNS.
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client
See Also
■ “clear ip dns domain” on page 110
■ “clear ip dns server” on page 111
■ “display ip dns” on page 120
■ “set ip dns domain” on page 138
■ “set ip dns server” on page 138
