34
PQ-8P, PQ-8S
COMMAND 09: PAPER SIZE
HP PCL only. Selects paper-size
setting.
VALUE DESCRIPTION
*0 Paper size specified
by host software
1 A4 size paper
2 Paper size selected
through printer’s
front panel
Example: &%Z09,1 selects A4 size
paper.
COMMAND 10: TRUE LPI
HP PCL only. Selects compressed or
true LPI (lines per inch) printing.
VALUE DESCRIPTION
0 No, compressed
LPI
1 Yes, true LPI
2 Xpoint Twinax
Controller
Compatibility
Example: &%Z10,1 selects true LPI.
NOTE
If you are using one of the
popular Electronic Forms
packages from companies
like XPoint, Eclipse, Formula
One, or others, use the true
LPI selection. Use the last
selection only if you want to
run the software setup for
the XPoint Twinax
Controller.
COMMAND 11: HOST PORT
INITIALIZATION STRING
Enters a twinax port initialization
string (in hex code, up to 25 pairs)
that is sent to the printer after the
interface has reconfigured the
printer for host printing. Consult
the printer’s user’s guide for the
available commands and proper
hex values.
VALUE
DESCRIPTION
0 (hex codes) Stores the hex
command as a host
port initialization
string
Example:
&%Z11,0(1B266C3844) sets LPI to 8
LPI on a Lexmark 4039 laser printer.
COMMAND 13: PAPER DRAWER 1
COMMAND
HP PCL only. Matches the host’s
Paper Drawer 1 command with a
physical paper source from the
printer. When the host sends a
command to the printer to feed
from paper drawer 1, the printer will
feed from the paper source assigned
to paper drawer 1. Consult the
printer’s user’s guide for the
available paper sources and
respective numbers.
VALUE DESCRIPTION
1 to 6 Paper sources
available on the
printer
*1 Default
Example: &%Z13,5 assigns the
optional 500-sheet cassette on an HP
LaserJet 4 Plus to the host’s paper
drawer 1 command.
*Factory-default setting
