40
PQ-8P, PQ-8S
VALUE DESCRIPTION
0 5256 Model 3
1 5224 Model 1
2 5225 Model 1
*3 4214 Model 2
Example: &%Z24,2 sets the active
printer emulation to 5225 Model 1.
NOTE
An AS/400 will auto-
configure when the PQ-8 is
powered on. Therefore, you
should save the new IBM
emulation and then cycle the
power on the interface to
communicate the new
emulation to the AS/400.
COMMAND 25: IBM MOTION
COMMAND
Manipulates the IBM motion
command.
VALUE DESCRIPTION
*0 Use FF (when
possible)
1 Substitute multiple
LF for FF
2 Suppress FF
3 Suppress CR, LF
and FF
NOTE
The Generic output protocol
is strongly recommended
when using a selection other
than the default.
Example: &%Z25,1 sets the PQ-8 to
count the lines specified through
LPI settings and replace FF with
multiple LF.
COMMAND 26:
WRAP/TRUNCATE TEXT
Printers without HP PCL only. Sets
the printer to wrap or truncate text
lines longer than 8 inches.
VALUE DESCRIPTION
*0 Wrap text
1 Truncate text at 8
inches
Example: &%Z26,1 Sets the printer
to truncate at 8 inches. Text beyond
8 inches will be lost.
COMMAND 28: 15 CPI PRINTING
IBM Proprinter only: Determines
how host commands for 15-CPI
printing should be executed.
VALUE DESCRIPTION
*0 No, prints 15 CPI
as 17.1 CPI
1 Yes, prints 15 CPI
as 15 CPI
*Factory-default setting
