37
PQ-8P, PQ-8S
COMMAND 20: STAR PANEL
OVERDRIVE
Activates star-panel overdrive to add
to the signal strength when
problems occur with passive star
panels.
VALUE DESCRIPTION
*0 Overdrive inactive
1 Overdrive active
Example: &%Z20,1 activates star-
panel overdrive.
NOTE
Do not activate the star-
panel overdrive when using
twinax cabling.
COMMAND 21: USER FONT
STRINGS
HP PCL only. Assigns a font ID to a
font. The first number (0-9) is one
of 10 available strings, the second
number (0-65535) is the host font
number. The characters shown in
parentheses are sent to the printer
when the host font number is
received. Refer to the printer’s
user’s guide or the documentation
accompanying the font cartridge
for a list of available fonts and
their respective strings. Use the <
character to indicate the ESCape
character.
VALUE DESCRIPTION
0-9, One of ten available
strings
0-65535 Host font number
(ASCII Char.)Up to 25 ASCII
characters
representing the
desired font
Example:
&%Z21,3,12345(<(12U<(s0p12h10v
1s3b6T)
This selects font #12345 as the
third font string and selects for a
Lexmark 4039 printer:
12U = code page 850
0p = fixed spacing
12h = 12 pitch
10v = 10 point
1s = italic
3b = bold
6T = letter gothic
COMMAND 22: DEFAULT PRINT
QUALITY
Printers without HP PCL only.
Defines the print quality when the
host sends “default print quality”
commands.
VALUE DESCRIPTION
*0 Draft
1 NLQ
Example: &%Z22,1 sets NLQ
printing as the default.
*Factory-default setting
