Arming Devices | Conventional | 123
•
The input unit should primarily be installed flush-
mounted.
Parts Included
Type Qty. Component
SE 100 GLT 1 Control unit
1 Reader
Technical Specifications
SE 100 GLT control unit
Operating voltage 10.8 V to 30 V
Total current consumption including blocking element and reader
•
Standby armed
53 mA
•
Standby disarmed
68 mA
•
When being engaged
140 mA for 300 ms
•
When blocking
200 mA for 200 ms
Environmental conditions
•
Protection category
IP 30
•
Operating temperature
-5 °C to +45 °C
•
Storage temperature
-40 °C to +85 °C
Housing
•
Material
ABS
•
Color
RAL 9002
Dimensions (H x W x D) 160 x 135 x 35 mm
Weight 0.25 kg
Reader
Range Max. 20 mm
Frequency 125 kHz
Transmission power 250 mW
Transmission power 250 mW
Cable to control unit Max. 6 m, 6-pin, shielded,
permanently cast
Environmental conditions
•
Environmental class
3
•
Protection category
IP 65
•
Operating temperature
-25 °C to +70 °C
•
Storage temperature
-40 °C to +85 °C
Housing
•
Material
ASA Luran S
•
Color
Titanium white (similar to RAL 9010)
Dimensions (H x W x D)
For installation in 55 mm
surface-mounted/flush-mounted
junction box
80 x 80 x 30 mm
Weight 0.35 kg
Ordering Information
SE 100 GLT SmartKey Arming Device
For arming/disarming an intrusion alarm sys-
tem via the reader as a system solution
IUI-SKCU1C-100
Accessories
Kit for recessed mounting (door frame) 4998021691C20
Kit for surface mounting, space for
magnetic contact
4998013609C20
Kit for upgrading NBS 10 4998040651C20
Blocking element 4998149110
Kit for mounting in glas doors 4998019339C20
www.boschsecurity.com Bosch Security Systems B.V.
4
