Arming Devices | LSN | 127
Standard key (without security card)
The keys are not numbered and can be read in as often as
required. The keys are labeled with an 8-digit identification
number.
SPE blocking element
The SPE blocking element is an additional lock for the door
and is intended to prevent unauthorized entry to the armed
area. The SPE blocking element must always be mounted in
the secure area with a kit to allow it to be fitted out for
different door types.
Motorized block locking function: All blocking elements for
an area are simultaneously engaged and disengaged.
A conventional bolt contact should be fitted to the control
unit (not part of the scope of delivery).
A conventional standard magnet contact can be connected
to the control unit (not part of the scope of delivery).
Certifications and Approvals
Region Certification
Europe CE SE 120 LSNi
SmartKey
Germany VdS G 106063, C SE 120 LSNi
Coun-
try
Certification SE 120 LSNi
DE VdS G 106063, C
Installation/Configuration Notes
Number of SmartKey keys
A maximum of 16 SmartKey keys can be used per system if
the SmartKey key is read in at the reader. In other respects,
the number of SmartKey keys depends on the control panel:
NZ 300 LSN = 40 keys, UEZ = 255 keys.
SE 120 LSNi without bolt contact
Due to the time shift caused by the LSN, up to four
SE 120 LSNi can be activated in 200 ms (not arming time).
In general, a bolt contact should be mounted.
SPE blocking element
•
If several LSN SmartKey systems need to block
simultaneously in one area (motorized block locking
function), the control units must be in the same LSN
processing assembly (on LVM for UEZ, on NV 120 for
UGM).
•
The SPE blocking element is always mounted in the
secure area with a mounting kit.
Parts Included
Type Qty. Component
SE 120 LSNi 1 SmartKey Arming device
control unit
Technical Specifications
SE 120 LSNi control unit
Operating voltage 9.6 V to 30 V
Total current consumption including blocking element at an
input voltage of 9.6 V
•
Standby LSN part
3.53 mA
•
Standby additional supply
41 mA
•
Bolt is engaged
110 mA for 200 ms
•
Bolt blocked
470 mA for 200 ms
Total current consumption including blocking element at an
input voltage of 28 V
•
Standby LSN part
3.53 mA
•
Standby additional supply
30 mA
•
Bolt is engaged
65 mA for 200 ms
•
Bolt blocked
200 mA for 200 ms
Environmental conditions
•
Environmental class
2
•
Protection type
IP 30
•
Operating temperature
- 5 °C to + 45 °C
•
Storage temperature
-40 °C to +85 °C
Housing
•
Material
ABS
•
Color
RAL 9002
Dimensions (H x W x D) 160 x 135 x 35 mm
Weight 0.25 kg
Ordering Information
SE 120 LSNi SmartKey Arming Device
For arming/disarming an intrusion alarm sys-
tem via the reader as a system solution
IUI-SKCU1L-120
www.boschsecurity.com Bosch Security Systems B.V.
4
