AutoDome Easy Auto Pan Menu 19
Bosch Security Systems, Inc. Installation and Configuration Manual December 06, 2006 | F01U032279
12.2 Running / Stopping a Tour
The AutoDome Easy is designed to display a customized sequence of preset shots covered by
the AutoDome Easy camera. To run a tour, do the following:
1. Press SHOT + 2 + 0 + (pre-defined tour #) + ENTER.
For example, to run tour 3, press SHOT + 2 + 0 + 3 + ENTER.
2. To stop a tour, move the joystick in any direction.
13 Auto Pan Menu
The Auto Pan function is designed to pan continuously between right and left limit settings.
This menu provides access to the starting point, ending point, tilt and zoom, and a customized
title feature.
13.1 Set Auto Scans
1. Press ON + 4 + 6 + ENTER to access the main menu.
2. Select AUTO PAN.
3. Select AUTO PAN and select the pan number (1-4).
4. To edit the title see Section 11: Creating Titles.
5. Select START POINT.
6. Press ON + 5 + ENTER to gain access of the CONTROL. When finished selecting the cam-
era’s starting point, press OFF + 5 + ENTER.
7. Select TILT AND ZOOM.
8. Press ON + 5 + ENTER to gain access of the CONTROL. When finished selecting the cam-
era’s tilt and zoom, press OFF + 5 + ENTER.
9. Select END POINT.
i
NOTICE! A shortcut is available for tour 1. Press ON + 8 + ENTER.
MAIN MENU AUTO PAN MENU
PRESET AUTO PAN: 1
TOUR TITLE: ==========
AUTO PAN START POINT: 017.0
SECTOR TILT AND ZOOM 002.6
ALARM END POINT: 176.9
CAMERA SETUP SAVE AND EXIT
DOME SETUP EXIT W/O SAVE
EXIT
Menu Description
Auto Pan Accesses a range of 1-4 for customized auto pan tours.
Title Controls a 10-character scene name which is displayed when the AutoDome Easy
runs the auto pan tour (must be user defined via the Title OSD).
Start Point Sets the left pan limit to start panning.
Tilt and Zoom Controls the camera movement in the vertical direction and the changing of the
effective focal length to allow different fields of view to fill the picture area. Zoom
can be optical, where the lens is adjusted, or digital, where a portion of the view
selected is magnified electronically.
End Point Sets the right limit to stop panning.
Save and Exit Saves the data and exits the menu.
Exit W/O Save Exits the menu without saving the data.
