20 Sector Menu AutoDome Easy
December 06, 2006 | F01U032279 Installation and Configuration Manual Bosch Security Systems, Inc.
10. Press ON + 5 + ENTER to gain access of the CONTROL. When finished selecting the cam-
era’s end point, press OFF + 5 + ENTER.
11. When satisfied, select SAVE AND EXIT. To exit without saving, select EXIT W/O SAVE.
13.2 Run Auto Pan
The AutoDome Easy is designed to display a customized auto pan between limits. To run the
auto pan feature, do the following:
1. Exit the OSD menu.
2. Press Shot + 3 + 0 + (Auto Pan number) + ENTER. For example, to run the auto scan for
course 4, press Shot + 3 + 0 + 4 + ENTER. Note: This is invalid if in menu mode.
14 Sector Menu
The sector function provides access to customizing individual sectors and titles. The factory
default is eight (8) evenly spaced sectors with titles from SECTOR1 to SECTOR8.
i
NOTICE! Two shortcuts are available for auto pan.
Press ON + 1 + ENTER to activate a continuous pan from 0 to 360 degrees starting at the cur-
rent tilt and zoom positions.
Press ON + 2 + ENTER to activate auto pan 1.
MAIN MENU SECTOR MENU
PRESET SECTOR: 1
TOUR TITLE: ==========
AUTO PAN START POINT: 017.0
SECTOR END POINT: 176.9
ALARM DELETE DATA
CAMERA SETUP SAVE AND EXIT
DOME SETUP EXIT W/O SAVE
EXIT
Menu Description
Sector Accesses a range of 1-8 for customized sectors.
Title Controls a 10-character scene name which is displayed when the AutoDome Easy
pans in any direction (must be user defined via the Title OSD).
Start Point Sets the left pan limit to display the sector title.
End Point Sets the right limit to display the sector title.
Delete Data Deletes the previously saved sectors.
Save and Exit Saves the data and exits the menu.
Exit W/O Save Exits the menu without saving the data.
i
NOTICE! Sector titles are displayed any time the camera moves and disappears three (3)
seconds after the camera stops.
