84 85
/ Using the Mounts
ATTACHING YOUR CAMERA TO MOUNTS
To attach your HERO4 Silver camera to a mount, you need a Quick
Release Buckle, thumb screw or hardware depending on the mount
you are using. For more information on mounts, visit gopro.com/support.
Quick Release
Buckle
Thumb Screw Housing Complete Unit
USING CURVED + FLAT ADHESIVE MOUNTS
The Curved + Flat Adhesive Mounts make it easy to attach the camera
to curved and flat surfaces of helmets, vehicles and gear. Using the
Quick Release Buckle, the assembled camera housing can be clicked
on and off the secured Curved or Flat Adhesive Mounts.
Flat Adhesive Mount Curved Adhesive Mount
Slim housing surfboard mount installation
Slim housing remove camera
Slim housing insert camera
Slim housing closed Swapping housing doors
Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit
/ Using the Mounts
MOUNTING GUIDELINES
Follow these guidelines when attaching mounts:
• Attach the adhesive mounts at least 24 hours prior to use. Allow
72 hours for complete adhesion.
• Adhesive mounts must be mounted only on smooth surfaces.
Porous or textured surfaces do not enable a proper bond. When
applying the mount, firmly press it into place and ensure full
contact over the entire surface.
• Apply adhesive mounts to clean surfaces only. Wax, oil, dirt or
other debris reduce adhesion, which can result in a weak bond
and risk of losing the camera should the connection fail.
• Attach adhesive mounts in room temperature conditions.
Mount adhesives do not bond properly if applied in cold or damp
environments to cold or damp surfaces, or if the surface is not
room temperature.
For more information on mounts, visit gopro.com/support.
WARNING: If using your camera with a GoPro helmet mount or
strap, always select a helmet that meets the applicable safety
standard. Choose the right helmet for your particular sport or
activity and make sure that it is the right fit and size for you.
Inspect your helmet to ensure that it is in good condition and
follow the helmet manufacturer’s instructions on safe helmet
use. Any helmet that has sustained a major impact should be
replaced. No helmet can protect against injury in every accident.
