CENTer
Command MACHine{1|2}:SCHart:CENTer <marker_type>
The CENTer command centers the chart display about the specified markers.
The markers are placed in the SLISt subsystem.
<marker_type>
{X | O | XO | TRIGger}
Example OUTPUT XXX;":MACHINE1:SCHART:CENTER XO"
HAXis
Command MACHine{1|2}:SCHart:HAXis
{STAtes,<state_low_value>,<state_high_value>|
<label_name>,<label_low_value>,<label_high_value>,
<state_low_value>,<state_high_value>}
The HAXis command allows you to select whether states or a label’s values
will be plotted on the horizontal axis of the chart. The axis is scaled by
specifying the high and low values. The shortform for STATES is STA. This
is an intentional deviation from the normal truncation rule.
<state_low_
value>
integer from –516096 to +516096 (HP 16554A), or from –1040384 to
+1040384 (HP 16555A), or from –2080768 to +2080768 (HP 16555D)
<state_high_
value>
integer from
<state_low_value> to +516096 (HP 16554A), +1040384
(HP 16555A), or +2080768 (HP 16555D)
<label_name> a string of up to 6 alphanumeric characters
<label_low_
value>
string from 0 to 2
32
−−1 (#HFFFFFFFF)
<label_high_
value>
string from
<label_low_value> to 2
32
–1 (#HFFFFFFFF)
SCHart Subsystem
CENTer
9–5
