<module_spec> {1|2|3|4|5|6|7|8|9|10}
<waveform>
string containing <acquisition_spec>{1|2}
<acquisition_
spec>
{A|B|C|D|E|F|G|H|I|J} (slot where acquisition card is located)
Example OUTPUT XXX;":MACHINE1:TWAVEFORM:OVERLAY 3, ’C1’,’C2’"
PLUS
Command :MACHine{1|2}:TWAVeform:PLUS
<module_spec>, <waveform>, <waveform>
The PLUS command inserts time-correlated A+B oscilloscope waveforms on
the screen. The first parameter specifies the slot where the oscilloscope
module resides. 1 through 10 refers to slots A through J. The next two
parameters specify which waveforms will be added to each other.
PLUS is only available for oscilloscope waveforms.
<module_spec> {1|2|3|4|5|6|7|8|9|10}
<waveform> string containing <acquisition_spec>{1|2}
<acquisition_
spec>
{A|B|C|D|E|F|G|H|I|J} (slot where acquisition card is located)
Example OUTPUT XXX; ":MACHINE1:TWAVEFORM:PLUS 1,’A1’,’A2’"
TWAVeform Subsystem
PLUS
13–19
