8 Chapter 1 Printer Basics
EN
Windows 95
a. The “Update Device Driver Wizard” window should appear on
the computer display.
b. Place the HP LaserJet 2200 CD in the CD-ROM drive.
c. Depending on the version of Windows 95:
• Click Next> (if available) and then skip to step 3 below.
- or -
• Click OK and then continue to step d below.
d. On the line provided, type D:\9xME_LPT (where D is the
letter of your CD-ROM drive), and then click OK.
Windows 98
a. The “Add New Hardware Wizard” window should appear on
the computer display. Click Next>.
b. Select “Search for the best driver for your device.
(Recommended)” and then click Next>.
c. Click the boxes as needed so that there is a check mark next
to “Specify a location:” (and NO check marks next to “Floppy
disk drives” and “CD-ROM drive”).
d. Place the HP LaserJet 2200 CD in the CD-ROM drive.
e. Under “Specify a location:”, type D:\9xME_LPT (where D is
the letter of your CD-ROM drive). Click Next>.
Windows 2000
a. The “Found New Hardware Wizard” window should appear on
the computer display. Click Next>.
b. Select “Search for a suitable driver for my device
(recommended)” and then click Next>.
c. Under “Optional search locations:”, click the locations as
needed so that there is a check mark next to “Specify a
location:” (and NO check marks next to “Floppy disk drives”
and “CD-ROM drives”). Click Next>.
d. Place the HP LaserJet 2200 CD in the CD-ROM drive.
e. Under “Copy manufacturer’s files from:”, type D:\2000
(where D is the letter of your CD-ROM drive) and then
click OK.
f. The Wizard should display a window indicating that it has
found the driver; click Next>.
