A SERVICE OF

logo

3 Voice System Administration System Control
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 85
Diagnose
The Diagnose menu allows you to perform diagnostics on system equipment.
Diagnose
Equipment
You can run diagnostics on E1/T1, LSPS, and SSP circuit cards. Run
diagnostics whenever the system displays a message indicating circuit card
failure.
To diagnose equipment:
1 Start at the System Control menu (Figure 54 on page 84) and select:
The system displays the Diagnose Equipment window (Figure 55).
Figure 55. Diagnose Equipment Window
> Diagnose Equipment
> Diagnose