3 Voice System Administration System Control
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 87
2 Enter the information as described in Table 6 on page 86.
3 Press F3 (Save).
The system displays a report showing the status of the specified
equipment.
4 Press F6 (Cancel) repeatedly until you return to the System Control
menu.
For more information on diagnostics, see Chapter 2, "Diagnostics," of UCS
1000 R4.2 System Reference, 585-313-210.
Renumbering Voice Channels
The Renumber Voice Channels option removes all nonexistent (NONEX)
circuit cards from the voice equipment table. It then reorders all existing
equipment with E1/T1 circuit cards first, followed by SSP circuit cards. This
reordering changes the channel numbers of some circuit cards. However,
user-defined characteristics such as options, attributes, and script
assignments do not change. If a circuit card is found in the system that was
not in the voice equipment table, it is added under the appropriate heading
(E1/T1 or SSP) with default settings.
