Filter
Top Products
13 EUROGRAND EG2280USB/EG8280USB User Manual
behringer.com
Detune5.3.2
This function allows you to detune the selected sounds slightly against
each other.
Please enter EDIT mode (see chapter 5.1) and select the ◊
following function.
Function: E3 .2
Value: -10 . . . 10
Description:
0: Same pitch for voice #1 and voice #2
<0: Voice #2 higher than voice #1
>0: Voice #1 higher than voice #2
Transposition5.3.3
Use this function to transpose the selected sounds up or down by one octave.
Depending on which sounds are used in a combination, the tranpose function can
help make the sounds more homogeneous.
Example:
In a combination of GRAND 1 and STRINGS, the STRINGS sound too low. In this
case, it helps to transpose the STRINGS up by one octave.
Please enter EDIT mode (see chapter 5.1) and select the ◊
following function.
Function: E3.3 (voice #1 transposed by an octave)
E3 .4 (voice #2 transposed by an octave)
Value: -1 . . . 1
Description:
0: No transposition
-1 : Transposition down by one octave
1: Transposition up by one octave
Effect intensity5.3.4
This function allows you to edit the effect intensity of the modulation effect for
the selected sounds.
Please enter EDIT mode (see chapter 5.1) and select the ◊
following function.
Function: E3 .5 (effect intensity voice #1)
E3 .6 (effect intensity voice #2)
Value: 0 . . . 20
Description:
1 . . . 20: Effect intensity (default setting)
0: No effect
Reset5.3.5
Use this function to reset all settings in layer mode.
Please enter EDIT mode (see chapter 5.1) and select the ◊
following function.
Function: E3 .7
Value: -
Description:
Press the +/YES button to execute this function.
Using the metronome5.4
The EG2280USB/EG8280USB features a built-in metronome which can be used for
practising or to make recordings with the internal music sequencer.
To use the metronome, please proceed as follows:
Press the CLICK button to start or stop the metronome.1.
The metronome beats are shown by flashing dots on the display. At the
beginning of a measure all dots light up simultaneously.
Keep pressing the MODE button in the TEMPO/EDIT MODE section until the 2)
TEMPO LED lights up.
Use the two Down/Up buttons to adjust a tempo of your choice.3)