Filter
Top Products
5 EUROGRAND EG2280USB/EG8280USB User Manual
behringer.com
Before You Get Started1.
Shipment1.1
Your EG2280USB/EG8280USB was carefully packed at the factory, and the
packaging was designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the packaging and its
contents for any signs of physical damage that may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER. ◊
Instead, notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be honored.
Always use the original packing carton to prevent damage during ◊
storage or transport.
Make sure that no children are left unsupervised with the ◊
EG2280USB/EG8280USB or its packaging.
Please ensure proper disposal of all packing materials.◊
Initial operation1.2
Be sure that there is enough space around the unit for cooling and please do not
place the EG2280USB/EG8280USB on high temperature devices such as radiators
etc. to avoid overheating.
Blown fuses must be replaced by fuses of the same type and rating! ◊
Please refer to the “Specifications” for details.
The mains connection of the EG2280USB/EG8280USB is made by using
the enclosed mains cable and a standard IEC receptacle. It meets all of the
international safety certification requirements.
Please make sure that all units have a proper ground connection. ◊
For your own safety, never remove or disable the ground conductor
from the unit or of the AC power cord.
The EG2280USB/EG8280USB is an electronic piano. Unlike an acoustic ◊
piano, this instrument does not need to be tuned.
The sound quality may diminish within the range of powerful ◊
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
Online registration1.3
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
Quick Start2.
Power on/off2.1
The EG2280USB/EG8280USB is a digital, i.e. electronic, piano. Therefore,
mains power is required to operate the instrument and it has to be switched on or
off. The following section describes how to connect the unit to the mains.
The POWER switch to the left of the keyboard must be in the “off” ◊
position when you connect the unit to the mains.
FUSE HOLDER / IEC RECEPTACLE
The EG2280USB/EG8280USB is connected to the mains using a standard IEC
receptacle. All required safety regulations have been adhered to. A matching
power cable is included with the unit. Blown fuses must be replaced with a fuse
of the same type and rating.
Connect the power cable supplied with the unit to the connector provided on 1)
the underside of the instrument and to a wall socket.
Press the POWER switch to the left of the keyboard to switch the instrument 2)
on or off. The LED on the front panel lights up when the EG2280USB/
EG8280USB is ready for operation.
After playing, switch off the unit with ◊
the POWER switch. The POWER LED on
the front panel will go out. Please note:
Merely switching the unit off does not mean
that it is fully disconnected from the mains.
If you do not plan to use your piano for a
prolonged period of time, please disconnect
it from the mains by unplugging the power
cable from the wall outlet.
Adjusting the volume2.2
The volume of the built-in loudspeakers and headphones can be adjusted
as follows:
Set the VOLUME control to mid-travel position, between MIN and MAX.1)
Adjust the volume as desired by moving the control to the right (up) or 2)
left (down).
Caution !
The EG2280USB/EG8280USB is capable of producing extreme volumes. ◊
Please bear in mind that high sound pressures not only temporarily
affect your sense of hearing, but can also cause permanent damage.
Be careful to select a suitable volume at all times, particularly when
you are playing with headphones.