Filter
Top Products
17 EUROGRAND EG2280USB/EG8280USB User Manual
behringer.com
Repeating musical passages for practicing5.5.4
The following section describes how to play back a specific passage of a recorded
music piece repeatedly. This function is ideal for practicing a specific difficult
passage recorded by your piano teacher.
To make the best use of this function, the left and righthand parts ◊
should be recorded separately on tracks 1 and 2. In this case, you can
play back one part only with the music sequencer, while you practice
the other part.
Select the track to be played back, so that the PLAY LED above the 1)
corresponding TRACK button lights up.
The volume of a muted track is adjustable (see chapter 5.5.5).◊
Press the 2) button to play back the selected track.
Press the MODE button in the TEMPO/EDIT MODE section when the playback 3)
has reached the point from which you want to start repeating a passage.
The display reads:
A-: Starting point of the loop is set.
Press the MODE button again when the playback reaches the point where 4)
you want to end the repetition of a passage.
The display reads:
A-b: Ending point of the loop is set.
The musical passage is now repeated continuously, so that you can practice it
to perfection.
When you want to stop practicing, press the 5) button again to stop
the playback.
Press the MODE button again to quit repetition mode.◊
The passage marked as a loop for repetition is automatically erased ◊
when you quit music sequencer mode.
Setting the volume of muted tracks5.5.5
This function allows you to set the volume of muted tracks. 1)
Please enter EDIT mode (see chapter 5.1) and select the ◊
following function.
Function: E6
Value: 0 . . . 20
Description:
1 . . . 20: Volume of muted track
0: Muted tracks are not audible
Editing the music sequencer settings5.5.6
The following paragraphs explain how to edit the playback settings of recordings
made with the music sequencer.
The following settings can be edited separately for each of the two tracks:
Sound (see chapter 2.4)•
Room effect intensity (see chapter 4.2.2)•
Modulation effect intensity (see chapter 4.2.3)•
Layered sounds (see chapters 4.1 and 5.3)•
The following global settings can be made for the whole music piece:
Tempo (see chapter 5.4)•
Meter (see chapter 5.4)•
Type of room effect (see chapter 4.2.2)•
Type of modulation effect (see chapter 4.2.3)•