Filter
Top Products
6 U-CONTROL UMA25S User Manual
External power supply:
If you neither want to draw the power supply via USB nor power the device with
batteries, there is yet another possibility to connect the UMA25S to an external
power supply unit. Please observe the correct operational data (DC 9 V; 200 mA)
and correct polarity of the connector. Further information can be found above the
DC input on the rear panel of the device. Reverse polarity may cause damage to
the electronics.
IMPORTANT Installation information:
The sound quality may diminish within the range of powerful ◊
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
Online registration1.1.3
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!
Product contents1.1.4
1 UMA25S keyboard with 2 strap buttons•
1 shoulder strap•
1 BEHRINGER HS1000 stereo headset with separate • 1/�" connectors for
headphone and microphone
1 printed manual•
1 printed quick-start guide “Podcasting with the UMA25S”•
2 CDs: CD 1: contains energyXT2 Compact for Mac computers and PCs •
CD 2: BEHRINGER ULTIMATE SOFTWARE PACKAGE
1 USB cable•
1 soft gig bag with shoulder strap•
System requirements1.2
A current Windows PC or Mac computer with one USB port is required for USB
operation. Both USB 1.1 and USB 2.0 are supported.
The UMA25S supports the USB MIDI compatibility of Windows XP/Vista ◊
and Mac OS X operating systems.
The UMA25S can also be operated as a stand-alone MIDI controller ◊
with no PC connected. Software control via MIDI is also possible,
provided your computer has a MIDI interface.
Hardware conguration1.3
To connect the UMA25S to your computer, use the provided USB cable.
Connect the supplied headset as shown in Fig. 1.3. Optionally, hook up further
units to the UMA25S as can be seen from the diagram.
Some headsets may cause interferences (humming). Should this be ◊
the case, make sure the UMA25S is sufficiently grounded, for example,
by connecting a grounded mixer to the LINE OUT connectors.
If necessary, reduce the microphones's input volume level with the
LEVEL control (19).
MONITOR SPEAKERS
HS1000*
Expression
USB*
MIDI
Sustain
MIDI Sound Module
* included
Fig. 1.3: Hookup example
Operating modes
There are dierent ways of using the UMA25S as a controller: a) Connect the
MIDI output of the UMA25S to external MIDI equipment (rack synthesizers,
samplers and similar); b) Connect the UMA25S to your computer via USB to
control your music software.
The rst option does not include the functionality of the UMA25S’ audio
interface. The MIDI routing changes depending on the operating mode you are
working in.