Bogen CAM8PRO Musical Instrument User Manual


 
© 2000 Bogen Communications, Inc.
All Rights Reserved.
Notice
Every effort was made to ensure that the information in this
guide was complete and accurate at the time of printing.
However, this information is subject to change.
Important Safety Information
Always follow these basic safety precautions when installing
and using the unit:
1. Read all instructions before installing or operating the
unit.
2. Follow all warnings and instructions marked on the
product.
3. DO NOT block or cover the ventilation slots and
openings.They prevent the product from overheating.
DO NOT place the product in a separate enclosure or
cabinet, unless proper ventilation is provided.
4. Never spill liquid on the product or drop objects into the
ventilation slots and openings. Doing so may result in
serious damage to the components.
5. Repair or service must be performed by a factory
authorized repair facility.
6. The product is provided with a UL-CSA approved, 3-wire
ground type plug.This is a safety feature. DO NOT defeat
the safety purpose of the grounding type plug. DO NOT
staple or otherwise attach the AC power supply cord to
building surfaces.
7. DO NOT use the product near water or in a wet or
damp place (such as a wet basement).
8. DO NOT use extension cords.The product must be
installed within 6 feet of a grounded outlet receptacle.
9. DO NOT install telephone wiring during a lightning
storm.
10. DO NOT install telephone jacks in a wet location unless
the jack is specifically designed for wet locations.
11. Never touch uninsulated wires or terminals, unless the
line has been disconnected at the paging or controller
interface.
12. Use caution when installing or modifying paging or
control lines.
Maintenance & Service
Caution
There are no user-serviceable parts within the unit. Have all inter-
nal servicing performed by a qualified technician. The warranty
will become void if repairs are made by other than the Bogen
Service Department or an authorized service agency.
Our Applications Engineering Department is available to help
you troubleshoot problems with your Bogen equipment.
Engineers are available from 8:30 AM to 6:00 PM, Eastern
Standard Time. Phone 1-800-999-2809.
Service can be obtained from our factory service department.
No merchandise may be returned for repair without prior
written authorization. Please contact our factory service
department at 1-800-999-2809 for a RA number. Only mer-
chandise specified in the return authorization form can be
returned to obtain warranty or non-warranty repair. When
shipping your unit, pack your system well using the original
shipping carton or a similar container and filler material to
prevent damage in transit. Send the unit fully insured and pre-
paid via UPS or other responsible carrier.
Domestic and International Listings
UL and CSA Listed.
Page 2 of 32