Filter
Top Products
E-15
3
Change the tempo setting as described below.
• A note does not sound when you press a keyboard
key while holding down the CONTROL button
(Figure d).
• While holding down the CONTROL button, press
keyboard key A
2 (–) to decrease tempo or B
2 (+) to
increase it. Holding down either keyboard key
changes the setting at high speed. Pressing keyboard
key A2 (–) and B
2 (+) at the same time changes the
tempo setting to 120.
• You can also change the tempo setting (beats per
minute) by holding down the CONTROL button and
using keyboard keys B
2 through A
3 to input values
from 0 to 9 (Figure c). You can input a two-digit or
three-digit tempo value. Note that the tempo value
you input is applied when you release the CONTROL
button. The tempo setting does not change if you
input a one-digit value or a value that is outside of
the allowable setting range.
• The tempo can be set within the range of 30 to 255
(beats per minute).
4
When you want to stop the metronome, press the
METRONOME button again.
• Pressing the METRONOME button again restarts the
metronome sound using the current beat and tempo
setting.
• If you want to change both the tempo and the beat
before restarting the metronome, perform the above
procedure here.
NOTE
• You can change metronome beat and tempo settings at
any time, even while the metronome is sounding.
• You can also use the metronome in combination with
memory play. See the section of this User’s Guide
covering the function for details.
Adjusting the Metronome Volume
Use the following procedure to increase and decrease the
volume of the metronome beat.
To adjust the metronome volume
1
While holding down the CONTROL button, use
the keyboard’s B
1 (–) and C2 (+) keys to adjust the
volume level (Figure a). The setting range is 000
to 127.
* A note does not sound when you press a keyboard
key while holding down the CONTROL button.
NOTE
• The metronome volume is automatically set to 110
whenever you turn on the digital piano.
Basic Operation
420A-E-019A