Casio CTK-4000 Electronic Keyboard User Manual


 
Controlling the Keyboard Sounds
E-16
Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.
The octave shift setting range is –2 to +2 octaves.
When using Split (page E-13), you can individually set the
left and right keyboard ranges to the pitches you want.
1.
Keep pressing
cp
until the screen shown below
appears on the display.
If you want to use Split, turn on Split before pressing
cp
.
If you do not perform any operation for a few seconds
after this screen appears, the display will return to the
previous screen automatically.
2.
Use the
br
(10-key) [–] and [+] keys to shift the
octave.
3.
Press
cp
.
4.
Press
cp
again.
You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This technique makes it
possible to produce effects that are similar to sounds
produced when bending notes on a saxophone or electric
guitar.
1.
While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.
The amount the note bends depends on how
much you rotate the pitch bend wheel.
Do not have the pitch bend wheel rotated
as you turn on the Digital Keyboard.
Use the following procedure to specify how much the pitch of
the note changes whenever the pitch bend wheel is rotated
upwards or downwards. You can specify a range from 0 to 12
semitones (one octave).
1.
Press
cs
and then use the
br
(10-key) [4] ( )
and [6] ( ) keys to display “OTHER” (page
E-6).
2.
Press
br
(10-key) [7] (ENTER) key.
3.
Use the
br
(10-key) [4] ( ) and [6] ( ) keys
to display “Bend Rng”.
4.
Use the
br
(10-key) [–] and [+] keys to change
the range.
Octave Shift
Split On : This step affects the right side keyboard
range only.
Split Off : This step affects the entire keyboard range.
Split On : The screen shown below will appear. Use the
br
(10-key) [–] and [+] keys to shift the
octave for the left side keyboard range.
Split Off : The screen shown below will appear.
Advance to step 4.
O c t U
pp
er
O c t L o w e r
Using the Pitch Bend Wheel to
Shift the Pitch of Notes
(CTK-5000 Only)
To play with the pitch bend wheel
Specifying the Pitch Bend Range
O T H E R
Flashes
Ben d Rn
g