Filter
Top Products
English
Other Useful Digital Keyboard Functions
E-55
You can use the following procedure to select from among 17
preset scales, including the standard Equal Temperament.
1.
Press
bp
.
2.
Press
3
.
3.
Use the
br
(10-key) [–] and [+] keys to select the
preset scale you want. After selecting a scale,
press the key on the keyboard that you want to
use as the root key (C to B).
• There are a total of 17 scales: the 16 shown in the table
above (page E-54) plus Equal Temperament (Number:
00, Scale Name: Equal).
4.
After you are finished, press
3
to assign the
scale to the keyboard.
You can store up to four “user scales” configured by you in
memory for later recall when you need them.
■To save a user scale
1.
Press
bp
.
2.
Press
3
.
3.
While holding down
cn
, press a button from
bt
to
cm
to select an area.
■To recall a user scale
1.
Press
bp
.
2.
Press
3
.
3.
Use buttons
bt
to
cm
to select the user scale
you want to recall.
■Saving Data on an External Device
(CTK-5000 only)
• SD memory card (page E-61)
• Computer (page E-68)
■Maintaining Data in User Scale Memory
(CTK-5000 only)
After you save data in user scale memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in user scale memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
1
to turn off power.
You can use the following procedure to reflect the scale you
adjusted using the scale fine tune or the quarter tone function,
or the preset scale you selected with the preset function in
Auto Accompaniments.
1.
Press
cs
and then use the
br
(10-key) [4] ( )
and [6] ( ) keys to display “OTHER” (page
E-6).
2.
Press
br
(10-key) [7] (ENTER) key.
3.
Use the
br
(10-key) [4] ( ) and [6] ( ) keys
to display “AcompScl”.
4.
Use the
br
(10-key) [+] key to select on.
Recalling a Preset Scale (CTK-4000 Only)
Saving User Scales (CTK-5000 Only)
E
q
u a l
Scale Name
Using the Current Scale Notes for Auto
Accompaniments
OTHER
Flashes