Filter
Top Products
Keyboard Settings
E-62
5. Press the LAYER button again to unlayer the tones
and return the keyboard to normal.
• Turning on layering switches the currently selected part from
Part 1 to Part 2, and displays the layered tone. At that time,
you can use the [ ] and [ ] CURSOR buttons to switch
between parts. Turning off layering returns to Part 1.
• The main tone sounds over Channel 1, while the layered
tone sounds over Channel 2. You can also use the Mixer to
change the tone and volume settings for these channels.
• Note that layering is not possible during record standby or
recording in the Song Memory Mode, or while you are using
the SMF Player Mode.
With split you can assign two different tones (a main tone and
a split tone) to either end of the keyboard, which lets you play
one tone with your left hand and another tone with your right
hand. For example, you could select GM STRINGS 1 as the
main (high range) tone and GM PIZZICATO as the split (low
range) tone, putting an entire string ensemble at your
fingertips.
Split also lets you specify the split point, which is the location
on the keyboard where the changeover between the two tones
occurs.
• Leave the MODE button in the NORMAL or FULL RANGE
CHORD position.
J SPLIT
1. First select the main tone.
Example:
To select “448 GM STRINGS 1” as the main tone,
press the TONE button and then use the number
buttons to input 4, 4 and then 8.
2. Press the SPLIT button.
1
Selected split tone
2
Pointer
3. Select the split tone.
Example:
To select “445 GM PIZZICATO” as the split tone,
use the number buttons to input 4, 4 and then 5.
4. Specify the split point. While holding down the
SPLIT button, press the keyboard key where you
want the leftmost key of the high end range to be.
Example:
To specify G3 as the split point, press the G3 key.
5. Now try playing something on the keyboard.
• Every key from F#3 and below is assigned the GM
PIZZICATO tone, while every key from G3 and above
is assigned the GM STRINGS 1 tone.
6. Press the SPLIT button again to unsplit the
keyboard and return it to normal.
Using Split
To split the keyboard
Si
g
1Gnrt
AuBsGsoc
21
PzatGczi
G3
707A-E-064A
CTK900_e.book 62 ページ ２００５年３月９日 水曜日 午後５時２９分