Filter
Top Products
installation in an existing SX-S mixer.
6.17 SX022251 SX-S Extension box
The Extension Box is a signal distribution box (300mm x 56mm x 40mm) shipped with 1,5m of cable with the
necessary connectors. Various connectors are installed in the distribution box to interface the SX-S mixer with the
Extension Module directly with the Stelladat, Nagra 4.2, and Nagra IVS, or other equipment.
6.18 SX022260 SX-S Boom box
This small box connects to the SX-S Extension Module with an optional cable (SX922120). The box incorporates a
1/4" headphone socket, a 3 pin XLR socket for a talkback microphone and a switch to call the mixer's operator with
a "Roll" indicator.
6.19 SX922120 SX-S Boom box cable
2-pair shielded cable 10 meters in length (longer on request) with 6 pin XLR connectors on each end to connect
the Boom Box with the SX-S Extension Module.
RETURN TO TABLE OF CONTENTS
7. INSTALLATION INSTRUCTIONS
for SX022270 SX-S Extension Module
7.1 Equipment:
{
022270 SX-S Extension Module
{ SX922130 Internal cable extension module - Extension Box
{ SX922140 Internal cable extension module - Boom Box
{
SX860141 Socket 1/4'' with 150mm shielded cable and Dubox case
{
SX8600342 6 Pin socket connector
{
SX860500 6 Pin socket connector with 300mm flat cable
{
SX942291 Blank Panel Jack 4.4 (2x)
{
SX980124 Allen head screw M2,5x8 (4x)
{
SX980123 Allen head screw M2,5x6 (4x)
{
SX986420 Washer ribbed M2,5 (8x)
Seite 15 von 22SONOSAX SX/S USER MANUAL
26.08.2004file://D:\Z
_
Librar
y
\Webco
py
\sonosax\SXS\sxsume.html