Filter
Top Products
¡
master section
signal monitoring features
The stereo inputs are equipped with a bicolor LED that displays the summed, Pre-
fader signal level with varying intensity green illumination, and also indicates impend-
ing channel overload (within 3dB of clipping) by turning red. Clipping is sensed both
pre and post fader, so even if the fader is down, you will be informed of any preamp
or EQ related overload problems.
A PFL (Pre-Fader Listen) switch is provided that lets the operator monitor the ste-
reo input signal in the console’s Solo system. When depressed, the channel’s pre-fader
signal sent to the console’s Solo system (see Master section for details on the Solo
system functions). The Stereo Inputs are monitored in stereo in the Solo system.
PK/Sig LED
Pre-Fader signal (summed L and R) is shown as varying GREEN intensity, while channel
clip warning illuminates RED.
PFL
When this switch is depressed (“IN”), the stereo pre-fader signal is sent to the console’s
Solo system. The channel LED is illuminated RED to indicate that the PFL is active.
rear panel connectors
The connectors associated with both stereo returns are located on the Master rear
panel. The TRS inputs are balanced, and can accept either balanced or unbalanced
signals. On all TRS inputs, the Left input is “normalled” into the Right jack, allowing
mono signals to be fed to both sides of the Stereo input by plugging the signal into
JUST the Left jack. If nothing is plugged into the Right jack, it will receive its source
from the Left jack. Once a plug is inserted into the Right jack, this “normal” con-
nection is broken and the Right input receives its signal from the Right jack.
78
78
79
79
80
80