Filter
Top Products
12
DE-10 Owner’s Manual
Effects in SINGLE 2 MODE
• L. HALL (Large Hall)
L. HALL-1 (Special Large Hall 1) : Hall reverb simulating a large hall with ideal acoustic characteristics which applies soft early
reflection sound.
L. HALL-2 (Special Large Hall 2) : Hall reverb simulating a large hall which applies different early reflection sound from L. HALL-1.
L. HALL-3 (Large Stage Reverb) : Hall reverb sounding on the stage in a large hall.
L. HALL-4 (Large Stadium) : Large stadium reverb.
L. HALL-5 (Large Theater) : Large theater reverb.
L. HALL-6 (Warm Large Hall) : Large hall reverb with thickness by applying chorus effect.
L. HALL-7 (Chorus Large Hall) : Clean large hall reverb with chorus effect.
L. HALL-8 (Sizzle Large Hall) : Large hall reverb with sizzle sound.
L. HALL-9 (Flanging Large Hall) : Clean large hall reverb with deep flanging effect.
L. HALL-10 (Large Cave) : Like a sound of wind blowing in a large cave.
L. HALL-11 (Large Tunnel) : Reverb in a large tunnel with flanging effect.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
• ROOM
ROOM-1 (Long E/R Room) : Room reverb with long early reflection.
ROOM-2 (Short E/R Room) : Room reverb with short early reflection.
ROOM-3 (Room E/R) : Room reverb with common early reflection. The amount of reverberation is small.
ROOM-4 (Announce Booth) : Room reverb with short early reflection and the small amount of reverb sound.
ROOM-5 (Pf Booth) : Reverb for adding the brightness to a piano sound.
ROOM-6 (Warm Room) : Room reverb which emphasizes the thickness of sound by applying chorus effect.
ROOM-7 (Chorus Room) : Room reverb with thin chorus effect.
ROOM-8 (Sizzle Room) : Room reverb with the characteristic high frequency range.
ROOM-9 (Flanging Room) : Room reverb with flanging effect.
ROOM-10 (Lo-F Flanging Room) : Room reverb with flanging effect applied only to the low frequency range.
ROOM-11 (Hi-F Flanging Room) : Room reverb with flanging effect applied only to the high frequency range.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
OUTPUT 1 (L)
OUTPUT 1 (R)
ROOM
INPUT 1
INPUT 2
• S. HALL (Small Hall)
S. HALL-1 (Special Small Hall 1) : Hall reverb simulating a small hall with ideal acoustic characteristics which applies soft early
reflection sound.
S. HALL-2 (Special Small Hall 2) : Hall reverb simulating a small hall which applies different early reflection sound from L. HALL-1.
S. HALL-3 (Small Stage Reverb) : Hall reverb sounding on the stage in a small hall.
S. HALL-4 (Small Stadium) : Small stadium reverb.
S. HALL-5 (Small Theater) : Small theater reverb.
S. HALL-6 (Warm Small Hall) : Small hall reverb with thickness by applying chorus effect.
S. HALL-7 (Chorus Small Hall) : Clean small hall reverb with chorus effect.
S. HALL-8 (Sizzle Small Hall) : Small hall reverb with sizzle sound.
S. HALL-9 (Flanging Small Hall) : Clean small hall reverb with deep flanging effect.
S. HALL-10 (Small Cave) : Like a sound of wind blowing in a small cave.
S. HALL-11 (Small Tunnel) : Reverb in a small tunnel with flanging effect.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
OUTPUT 1 (L)
OUTPUT 1 (R)
S. HALL
INPUT 1
INPUT 2
OUTPUT 1 (L)
OUTPUT 1 (R)
L. HALL
INPUT 1
INPUT 2
• PLATE
PLATE-1 (High-Density Plate) : High density plate reverb.
PLATE-2 (High-Density Old Plate) : High density plate reverb with deep and fat sound.
PLATE-3 (High-Density Vivid Plate) : High density plate reverb with the vivid high frequency range.
PLATE-4 (Phase Shift Plate) : Plate reverb with phase-shifted sound.
PLATE-5 (No E/R Plate) : Neutral plate reverb sound, with no early reflection.
PLATE-6 (Warm Plate) : Rich plate reverb sound with chorus effect.
PLATE-7 (Chorus Plate) : Plate reverb with thin chorus effect.
PLATE-8 (Sizzle Plate) : Plate reverb with the characteristic high frequency range.
PLATE-9 (Flange Plate) : Plate reverb with flanging effect.
PLATE-10 (Lo-F Flange Plate) : Plate reverb with flanging effect applied only to the low frequency range.
PLATE-11 (Hi-F Flange Plate) : Plate reverb with flanging effect applied only to the high frequency range.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
OUTPUT 1 (L)
OUTPUT 1 (R)
PLATE
INPUT 1
INPUT 2