Filter
Top Products
9
DE-10 Owner’s Manual
• VOCAL
VOCAL 1 (Standard Vocal) : Same as DUAL mode VOCAL 1, but higher density reverberation.
VOCAL 2 (Karaoke) : Same as DUAL mode VOCAL 2, but higher density reverberation.
VOCAL 3 (Vocal Booth) : Same as DUAL mode VOCAL 3, but higher density reverberation.
VOCAL 4 (Warm Vocal) : Same as DUAL mode VOCAL 4, but higher density reverberation.
VOCAL 5 (Diffusion Vocal) : Same as DUAL mode VOCAL 5, but higher density reverberation.
VOCAL 6 (Natural Vocal) : Same as DUAL mode VOCAL 6, but higher density reverberation.
VOCAL 7 (Vivid Vocal) : Same as DUAL mode VOCAL 7, but higher density reverberation.
VOCAL 8 (Wet Vocal) : Same as DUAL mode VOCAL 8, but higher density reverberation.
VOCAL 9 (Doubling Vocal) : Same as DUAL mode VOCAL 9, but higher density reverberation.
VOCAL 10 (Dry Vocal) : Mysterious reverb with a light flanging effect applied to VOCAL 1.
VOCAL 11 (Stadium Vocal) : Mysterious reverb with a light flanging effect applied to VOCAL 4.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
PLATE 7 (Dark Plate) : Same as DUAL mode PLATE 7, but higher density reverberation.
PLATE 8 (Hi-Freq Plate) : Same as DUAL mode PLATE 8, but higher density reverberation.
PLATE 9 (Mid-Freq Plate) : Same as DUAL mode PLATE 9, but higher density reverberation.
PLATE 10 (Large E/R Plate) : Unusual plate reverb with a light flanging effect applied.
PLATE 11 (Flat Plate) : Special reverb with an aggressive flanging effect applied.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Reverb Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the E/R Level.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
OUTPUT 1 (L)
OUTPUT 1 (R)
VOCAL
INPUT 1
INPUT 2
OUTPUT 1 (L)
OUTPUT 1 (R)
PLATE
INPUT 1
INPUT 2
• DLY + REV (Delay + Reverb)
DLY+REV 1 (Mono Delay + Reverb) : Mono delay with reverberation.
DLY+REV 2 (Long Mono Delay + Reverb) : Long mono delay with reverberation.
DLY+REV 3 (L-R Delay + Reverb) : Panning delay with reverberation.
DLY+REV 4 (Long L-R Delay + Reverb) : Long panning delay with reverberation.
DLY+REV 5 (Short Delay + Reverb) : Short delay with reverberation.
DLY+REV 6 (Lo-Freq Mono Delay) : Mono delay only for the low frequency range.
DLY+REV 7 (Hi-Freq Mono Delay) : Mono delay only for the high frequency range.
DLY+REV 8 (Lo-Freq L-R Delay) : Panning delay only for the low frequency range.
DLY+REV 9 (Hi-Freq L-R Delay) : Panning delay only for the high frequency range.
DLY+REV 10 (Lo-Freq L-R Delay + Reverb) : Panning delay only for the low frequency range, with reverberation.
DLY+REV 11 (Hi-Freq L-R Delay + Reverb) : Panning delay only for the high frequency range, with reverberation.
* [EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Delay Time.
* [EFFECT 2_ADJUST] knob (PARAM.2): Adjust the Delay Feedback.
* [EFFECT 2_MIX] knob (PARAM.3): Adjust the Reverb Time.
OUTPUT 1 (L)
OUTPUT 1 (R)
DELAY
INPUT 1
INPUT 2
REVERB
• DELAY
DELAY 1 (Stereo Long Delay) : Long stereo delay with maintaining the stereo image.
DELAY 2 (Stereo Delay) : Mid stereo delay with maintaining the stereo image.
DELAY 3 (Stereo Short Delay) : Short stereo delay with maintaining the stereo image.
DELAY 4 (Mono Long Delay) : Mono long delay.
DELAY 5 (Mono Delay) : Mono short delay.
DELAY 6 (L-R Long Delay) : Long panning delay.
DELAY 7 (L-R Delay) : Short panning delay.
DELAY 8 (Diffusion Long Delay) : Long diffusion delay.
DELAY 9 (Diffusion Delay) : Short diffusion delay.
DELAY 10 (Doubling) : Center-panned doubling
DELAY 11 (Diffusion Doubling) : Diffusion doubling.
*[EFFECT 1_ADJUST] knob (PARAM.1): Adjust the Delay Time.
*[EFFECT 2_ADJUST] knob (PARAM.2): Adjust the Delay Feedback.
*[EFFECT 2_MIX] knob (PARAM.3): Adjust the Character.
OUTPUT 1 (L)
OUTPUT 1 (R)
DELAY
INPUT 1
INPUT 2