Filter
Top Products
14
HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10
Turbine Installation
The SMARTBOX™ Controller
The SMARTBOX™ Controller contains all the electronic controls needed to integrate
to the home’s electrical switch board circuits. The SMARTBOX™ Controller is
housed in a NEMA 3R enclosure and must be mounted on the wall next to the home’s
electrical switch board. The SMARTBOX™ has an LCD display and four operational
buttons. Details of the function of these buttons is listed in the SMARTBOX™
Controller Manual. Please read the SMARTBOX™ Controller Manual and always
consult and use a certied and trained electrician for connections and service.
TIP: The instructions in this section apply to a typical installation. Installation
procedures may vary according to your specic application. For special ap-
plications, consult a qualied electrician or your WindTronics certied dealer.
IMPORTANT: Installation must be compliant with all local electrical codes.
Installation of this equipment should only be performed by a qualied
electrician or by a Certied Renewable Energy System Installer.
Figure 2.5 The SMARTBOX™ Controller