Honeywell WT6500 Musical Instrument User Manual


 
IV
HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10
DO NOT CONNECT THE HONEYWELL WIND
TURBINE TO ANY CONTROLLER OTHER THAN THE
SMARTBOX™ Controller OR OTHER CONTROLLER
PRE-APPROVED, IN WRITING, BY WINDTRONICS.
Failure to follow this warning will void the HONEYWELL
Wind Turbine warranty and may result in death, personal
injury or property damage (including damage to the
HONEYWELL™ Wind Turbine).
5. Choose a very calm, nearly no wind, day for the installation.
6. Follow the installation procedures contained within this Owner’s Manual and all safety
codes. Follow the National Electric Code (NEC) and your local building zoning and
zoning codes. In Canada, follow the Canadian Electrical Code (CEC).
7. Only licensed and trained personnel should move and lift the HONEYWELL™ Wind
Turbine. The HONEYWELL™ Wind Turbine should only be moved using standard
hoists and hydraulic lifts.
8. Appropriate protective personal equipment such as hard hat, work gloves,
safety glasses, and closed toe work shoes should be worn when installing the
HONEYWELL™ Wind Turbine.
9. Only licensed and trained personnel can perform the following maintenance functions
on this HONEYWELL™ Wind Turbine:
Open and work on the SMARTBOX™ Control Equipment.
Open and work on the Junction Box at the turbine
Apply any torque to any of the turbine’s fasteners
10. The installation directions include recommendations of a variety of options. Installation
must be approved and certied by your local Professional Engineer (PE) and the
installer must acquire all the necessary permits from the local authorities prior to
installation.
11. Your installer must use only proper grounding methods as stipulated by the NEC or
CEC if in Canada.
12. The HONEYWELL™ Wind Turbine is an electric generator. Therefore high voltage
is generated within the system. Be sure to only use installers and maintenance
professionals to perform work on this turbine.
13. Failure to complete and mail in the registration card will affect the Warranty.
14. Failure to use a licensed and trained installer or follow local codes will
adversely affect the warranty coverage and possibly void your
warranty.
NOTE TO INSTALLER: This Owner’s Manual should be left with the owner of the
HONEYWELL™ Wind Turbine.