Filter
Top Products
Assembling the stand 39
Note: Unless the adjuster is in firm contact with the floor, the pedal will wobble,
possibly causing malfunctions
Verify that all screws are firmly tightened. Finally, place caps on the heads of pedal
box screws (a).
10 Connect the included power cable to the AC adaptor.
11 Connect the pedal cable and the DC plug of the AC adaptor to the bottom of the
instrument, and use the cable retainers to fasten the cables.
Screw into holes on the
back of the instrument
Loosen adjuster to the correct position
Instrument fastening bolts
Included power cable
DC plug
AC adaptor