Filter
Top Products
12
Using headphones
If you’re using headphones, connect them to the headphone jack. If your head-
phones have a mini (1/8") jack, you’ll need to use a 1/8"
→
1/4" adapter.
Grasp the plug (or adapter), not the cable, when connecting or disconnect-
ing headphones.
If headphones are plugged into the headphone jack, the LP-350’s speakers will not
produce sound. Use headphones at night, or when you don’t want to be heard by
those nearby.
To protect your hearing, don’t listen through headphones at high volumes
for an extended period of time.
Turning the power on
Press the power switch to turn on the LP-350. When you do so, indicators above the
front panel sound select buttons and BANK button etc. will light.
To turn the power off, press the power switch once again.
Adjusting the volume
Use the MASTER VOLUME slider to adjust the volume of the internal speakers,
headphone jacks, and the line out jack.
Move the slider toward the left to decrease the volume, or toward the right to
increase the volume.
When adjusting the volume, start with the MASTER VOLUME slider at the
0 position, and move it gradually toward the right to increase the volume
gradually.
Connecting the line out jack
If you want to connect amplified speakers (other than the LP-350’s own built-in
speakers), or to a PA system or recording setup, connect the line out jack to the input
jack of your equipment.
The line out jack is a stereo mini (1/8") connector. Use a commercially available
cable of the appropriate type for the equipment you’re using.
Turn off the power of the LP-350 and your other equipment before making
connections. Making connections while the power is on may damage the
LP-350 or the connected equipment or cause malfunctions.