Filter
Top Products
17
When you turn off the power, the effect settings will return to their factory
settings. You can use the Data Dump function to save your effect mode set-
tings on an external MIDI data filer (“MIDI data dump” on page 29).
You can’t change the effect (reverb, chorus) settings while a demo song is
playing.
1. To turn the reverb on, press the REVERB button. To turn the chorus on, press
the CHORUS button.
The indicator above each button will light.
2. To adjust the settings of the reverb or chorus effect, hold down the REVERB
or CHORUS button and press the [PIANO 1/L], [PIANO 2/M], or [E.PIANO 1/
H] sound select button.
The reverb or chorus effect will be set as follows.
To check the setting of the reverb effect or chorus effect
Hold down the REVERB button; the indicator above one of the sound select
buttons [PIANO 1/L]–[E.PIANO 1/H] will light to indicate the current setting.
Hold down the CHORUS button; the indicator above one of the
sound select
buttons
[PIANO 1/L]–[E.PIANO 1/H] will light to indicate the current setting.
3. To turn the reverb off, press the REVERB button. To turn the chorus off, press
the CHORUS button.
The indicator above the button will go dark.
Using the pedals
The LP-350 has three pedals; damper, sostenuto, and soft.
You can use the pedals to make your playing more expressive and realistic.
Damper pedal
The notes will be sustained while you hold down this pedal, and the sound will
have a richer resonance. The degree to which you press this pedal will change the
amount of the damper effect (i.e., half-pedaling is supported).
Sound button Reverb effect setting Chorus effect setting
[PIANO 1/L] Light Light
[PIANO 2/M] Medium Medium
[E.PIANO 1/H] Deep Deep
Soft pedal
Sostenuto pedal
Damper pedal