Filter
Top Products
29
Enabling/disabling program changes
Enable this setting if you want program change messages to be transmitted and
received, or disable it if you don’t want these messages to be transmitted or
received.
To enable or disable program changes, hold down the TRANSPOSE/FUNCTION
button and press the [PIANO 2/M] sound select button. Each time you do so, the
setting will switch between Enabled and Disabled.
When you turn off the power, the setting will revert to Enable.
Control changes
Messages such as operations of the LP-350’s damper pedal can be transmitted to a
connected external MIDI device to control it, and these messages can be received
from an external MIDI device to control the LP-350.
Enabling/disabling control changes
Enable this setting if you want control change messages to be transmitted and
received, or disable it if you don’t want these messages to be transmitted or
received.
To enable or disable control changes, hold down the TRANSPOSE/FUNCTION but-
ton and press the [E.PIANO 1/H] sound select button. Each time you do so, the set-
ting will switch between Enabled and Disabled.
When you turn off the power, the setting will revert to Enable.
MIDI data dump
The LP-350 can transmit its sound settings and effect settings to an external MIDI
data filer (storage device) for saving. When desired, you can load this data back into
the LP-350 to reproduce the saved settings.
Carefully read the owner’s manual for your data filer, and be sure not to
delete important data that you want to keep.
Do not touch the LP-350’s keyboard or buttons while a data dump is being
executed.
Setting PIANO 2 indicator
Enabled lit
Disabled dark
Setting E.PIANO 1 indicator
Enabled lit
Disabled dark