Filter
Top Products
37
7. Connect the pedal cable and speaker cable to the connectors on the LP-350’s
rear panel. Then use the cable holder to secure the pedal cable.
Pay attention to the orientation of the connectors when connecting the
pedal cable and speaker cable.
8. Connect the dedicated cable to the AC adapter. Then plug the AC adapter into the
DC IN connector, and wrap the cable around the cable hook of the digital piano.
For details, refer to “Connect the AC adapter” on page 10 .
9. Place the digital piano where you intend to use it. Make sure to place it in a
safe location where the floor is flat and stable.
When setting the digital piano in place, make sure that the stand does not
rest on the AC adapter cable or pedal cable.
For greater safety, we recommend that you always attach the anti-tipping
blocks to the rear of the left and right side panels.
Check following assembly
• Are any parts left over?
If any parts are left over, carefully review the assembly procedure to see
where those parts should have been used.
• Make sure that all screws are tight.
Speaker cable
Pedal cable
Cable holder