Filter
Top Products
10
Program Mode
Press the PROG key to enter the program mode.
You can replay 24 programs in this mode. In
addition, you can change the parameters pre-
set in the programs, such as the beat, the tempo,
and the rhythm note volume, which can be
saved.
Selecting the program
(1) In the program mode, press the parameter
selection key positioned under “PROG.”
(2) Enter the program number using the and
keys or the numeric keys. Specify the pro-
gram numbers - by two digits.
When the program is selected, the param-
eter values preset in the program are re-
trieved. When selecting a program while an-
other is being replayed, the newly selected
program starts on completion of current pro-
gram.
Starting/stopping the program replay
(1) ress the START/STOP key to start replay of
the program.
(2) Press the START/STOP key to stop replay
of the program while it is being replayed.
Specifying the beat
(1) Press the parameter selection key positioned
under “BEAT.”
(2) Enter the beat number using the and
keys or the numeric keys. Specify the beat
by one digit. “EDIT” appears on the LC dis-
play when the setting is changed.
Specifying the tempo
(1) Press the parameter selection key positioned
under “TEMPO.”
(2) Enter the tempo using the and keys or
the numeric keys. Specify the tempo by three
digits. If not, press the TAP key twice or more
to specify the intermediate time as the tempo.
When the program pauses, replay starts im-
mediately after you specify a tempo using the