Filter
Top Products
17
state, and the chain number blinks on the
display.
(2) Enter the chain number where the settings
are to be saved using the and keys or
the numeric keys.
Note: Once the writing operation is ex-
ecuted, the setting currently saved in
the selected chain number is overwrit-
ten.
To cancel the writing operation, press
either the parameter selection key or
the mode key.
(3) Press the WRITE key.
The parameters are saved and “EDIT” dis-
appears from the LC display.
Training Mode
Press the TRAINING key to enter the training
mode.
In the training mode, 39 training patterns ideal for
snare drum practice are preset. You can replay
them and adjust their tempos while replaying.
In the training mode, the sounds and the LEDs
guide you to beat correct time.
The high note sound is generated and the green
LED blinks at the timing of right hand beat. The
low note sound is generated and the red LED
blinks at the timing of left hand beat.
Selecting the training pattern
(1)In the training mode, press the parameter
selection key positioned under “TRAINING.”
(2) Select the training number using the and
keys or the numeric keys. Specify the train-
ing number by two digits.
Starting/stopping the training pattern
(1) Press the START/STOP key to start replay
of the training pattern.
The reference beat is given first and followed
by the training pattern.
(2) Press the START/STOP key to stop replay
of the training pattern while it is being re-
played.