Filter
Top Products
13
Chain configuration
4
6
3
6
2
5
1
5
5
7
• • •
• • •
16
6
PROGRAM
TEMPO
PRG
BAR
CHAIN 1
43
--
2
11
1
10
5
• • •
• • •
16
PROGRAM
TEMPO
140
BAR
CHAIN 2
4
16
3
16
2
15
1
15
5
17
• • •
• • •
16
PROGRAM
TEMPO
72
BAR
CHAIN 8
• • • •
• • • •
• • • •
- When a chain is replayed, bars 1 to 16 are re-
played in this order. On completion of replay of
bar 16, the BEATLAB returns to bar 1 and re-
peats eplay. When you specify the end com-
mand to a bar, symbol “- -” appears on the LC
display. In this case, the BEATLAB continues
replay from bar 1 to the bar just before the one
having the end command, then returns to bar
1. In Chain 2, for example, because bar 3 has
the end command, the BEATLAB returns to
bar 1 after replaying bar 2, resulting in alterna-
tive replay of bars 1 and 2.
-You can specify a tempo to the entire chain, in
which case the programs are all replayed in
the tempo you specify. Otherwise you can re-
play the individual programs in the tempos
specified to them.
Selecting the chain
(1) In the chain mode, press the parameter se-
lection key positioned under “CHAIN.”
(2) Enter the chain number using the and
keys or the numeric keys. Specify the chain
number by one digit.
When selecting a chain while another chain
is replayed, the newly selected chain starts
on completion of current program of the bar.
Starting/stopping the chain
(1) Press the START/STOP key to start replay
of a chain.
(2) Press the START/STOP key to stop replay