Filter
Top Products
8
U.40d 4-Channel Mic/Line Mixer
U.420d 4-Channel Mic/Line Mixer
Software installation
For the PC:
When using the mixer with a PC, it is necessary to
first install the drivers and the control panel. The con-
trol panel allows you to set the sample rate and adjust
the latency of the audio passing through the mixer’s
FireWire interface. If you use a Macintosh computer,
please jump ahead to page 30.
The U.420d and U.420 share the same install-
er, so the screenshots say “U.420” even though
you have a U.420d. No worries.
Do not connect the mixer’s FireWire con-
nector to your computer just yet. We will
tell you when.
To install the software on a PC running
Windows XP (SP):
1. Turn off any (non-essential) applications.
2. Insert the U.420d CD-ROM into your PC’s CD-
ROM drive.
3. C
lick Start in the task bar, then click Run and
click Browse. Browse to your CD drive and
double-click _SETUP.EXE. Then click OK to
start the installation.
4. The Installer opens. Click “Continue.”
5. Next you will see the License Agreement. Read
through the text and if you are all in favor, click
“I Agree.”
6. The next window reminds you to make sure the
U.420d is NOT connected to your computer yet.
Read the instructions and click “Continue.”
7. You may get a warning about running the
installer because it hasn’t passed Windows
Logo testing. It’s okay. We’ve tested it and it is
compatible with Windows XP. Click “Continue
Anyway.”
8. Now it is time to connect your U.420d FireWire
connection to your computer. Follow the in-
structions and then click “Next.”