Filter
Top Products
Embedded Module for Blackfin Processors 16 ni.com
4. Save the VI as Blackfin Tutorial.
Configuring the Target and Debugging Options
The target options you set tell LabVIEW how the Blackfin target is
connected to the host computer. The EZ-KIT Lite is connected to the host
computer through the USB port, which also is known as a debug agent.
Note You only have to configure the target once unless you change how you connect the
target to the host computer.
Complete the following steps to configure the target options.
1. Right-click Analog Devices ADSP-BF537 in the Project Explorer
window and select Configure Target from the shortcut menu to open
the VisualDSP++ Target Configuration dialog box. The current
version and location of VisualDSP++ in the Product name list and the
Location text box reference the version of VisualDSP++ on the host
computer. Correct the product name and location if necessary.
2. Select Blackfin Emulators/EZ-KIT Lites from the Debug target
pull-down menu.
3. Select ADSP-BF537 EZ-KIT Lite via Debug Agent from the
Platform pull-down menu.
4. Select ADSP-BF537 from the Processor pull-down menu as shown in
Figure 11.
Figure 11. Configuring the Target Settings