Filter
Top Products
© National Instruments Corporation 7 Embedded Module for Blackfin Processors
LabVIEW 8.2.1 project (.lvproj) files. Complete the following steps to
update embedded project files for use with LabVIEW 8.2.1 and the
Embedded Module for Blackfin Processors 2.0.
1. Launch LabVIEW 8.2.1.
2. Select File»Open in the Getting Started window and navigate to the
labview\Targets\ADI\Embedded\vdk\utils\Blackfin LEP
Converter\
directory.
3. Select
Blackfin_LEP_Converter.vi and click the OK button to
run the Blackfin LEP converter utility.
4. Complete the following steps to add the LEP file you want to import to
the LabVIEW Embedded Project (*.lep) Files list.
a. Click the Add button below the LabVIEW Embedded Project
(*.lep) Files list. The Select an Embedded Project to Add dialog
box appears.
b. Navigate to the location of the LEP file you want to import.
c. Click the Add button. LabVIEW adds the LEP file and all the VIs
associated with the LEP file to the Blackfin LEP converter utility.
You can see only the LEP file in the LabVIEW Embedded
Project (*.lep) Files list.
5. Click the Continue button. LabVIEW prompts you to specify the
location and name of the new project.
6. The Import Status dialog box appears. When LabVIEW finishes
importing the 1.0 files, the Project Explorer window appears with
the Blackfin target and VIs.
7. Complete the following steps to verify the target configuration and
build specifications.
a. Right-click the Blackfin target in the Project Explorer window
and select Configure Target from the shortcut menu.
b. Verify the settings in the VisualDSP++ Target Configuration
dialog box and click the OK button. Refer to the Configuring the
Target and Debugging Options section for information about
configuring the Blackfin target.
c. Right-click the build specification under the Blackfin target in
the Project Explorer window and select Properties from the
shortcut menu to open the Build Specifications Properties dialog
box.
d. Verify the settings in the Application Information and Source
Files categories and click the OK button. Refer to the Creating the
ADSP-BF537 Build Specification section for information about
editing a build specification.