Filter
Top Products
15
Notes
:
• To replay the current track, press
SEARCH/SKIP (
l
).
• To play the next random track, press
SEARCH/SKIP (
l
).
To stop the CD player at any time during
random play, press
STOP. The CD/
CDG’s total number of tracks and play-
ing time appear. When you press
PLAY/
PAU SE again, random play resumes.
To cancel random play and resume nor-
mal play, press
RANDOM again. RAN-
DOM
disappears and the CD/CDG player
resumes normal play.
PROGRAMMED PLAY
You can program the CD/CDG player
during normal or karaoke mode to play
up to 20 tracks in any order you choose,
and you can program the same track to
play more than once.
Programming and Playing a
Sequence of Tracks
1. Repeatedly press STOP until the
system displays the total number of
tracks and the total playing time.
2. Press
MEMORY.
MEMORY flashes at the top of the
display along with the track number.
The program number also appears.
Note
:
MEMORY remains on the top
left corner of the display until you
erase the programmed sequence.
3. Press
SEARCH/SKIP (
l
) or (
l
)
to select the desired track.
4. Press
MEMORY to store the selected
track. The cumulative time from the
programmed tracks appears, while
MEMORY and the track number con-
tinue to flash.
Note
: If you enter the wrong track
number, you can erase the
sequence and start over. See “Eras-
ing a Programmed Sequence” on
Page 16.
5. Repeat Steps 3 and 4 to program up
to 20 tracks.
Note
: You cannot store more than
20 tracks. If you try to store a 21st
track, the system replaces the first
track stored, and the total number of
tracks and the total play time appear
on the display. Also, any additional
tracks you try to store will replace
the next successive track.
6. Press
PLAY/PAUSE to play the pro-
grammed tracks. The first track
number appears on the display with
the elapsed time of the track in play.
32-1166.fm Page 15 Wednesday, November 17, 1999 4:51 PM