Filter
Top Products
8
CONNECTING OTHER
AUDIO COMPONENTS
You can connect an external audio
source or component to the karaoke
system, so you can sing along with other
audio formats or videos, or hear the
karaoke’s sound from another speaker
or a PA system. To make the connec-
tion, you need optional audio patch ca-
bles (such as Cat. No. 42-2352).
Connecting an External Audio
Source for Input
You can connect another audio source,
such as a stereo VCR or another CD
player, so you can sing along with the
audio source’s sound. Connect the
source’s stereo audio output jacks to the
system’s
AUX IN R and L jacks.
Note:
If your audio source does not
have AUX OUT R and L jacks, but has
only a headphone or line out jack (such
as on a portable tape or CD player), use
a shielded Y-adapter cord with phono
jacks on each end (such as Cat. No. 42-
2475). Connect the single-plug end to
the audio source’s headphone or line
out jack, and connect the other end’s
two phono plugs to the system’s
AUX IN
R
and L jacks.
Connecting an External Audio
Component for Output
You can broadcast the karaoke sys-
tem’s sound through an external audio
component such as a PA system ampli-
fier. Connect the external audio compo-
nent’s audio input jacks to the karaoke
system’s
AUX OUT R and L jacks.
Connecting an External
Speaker
You can connect an external 8 to15-watt
stereo speaker with 4-8 ohm impedance
to the system for a stereo effect. Plug
the speaker’s phono plug into
4-8 OHM
SPEAKER
/ RIGHT CHANNEL on the sys-
tem.
32-1166.fm Page 8 Wednesday, November 17, 1999 4:51 PM