Filter
Top Products
16
Notes
:
• You cannot use random play to
play a programmed sequence.
• You can repeat or search through
programmed tracks. To repeat the
programmed sequence, see
“Repeat Play” on Page 14.
7. Programmed play automatically
stops at the end of the last pro-
grammed track. To stop the CD/
CDG player at any time during pro-
grammed play, press
STOP. The CD/
CDG’s total number of tracks and
playing time appear.
Reviewing/Replacing a
Programmed Sequence
While play is stopped, repeatedly press
MEMORY to review the programmed se-
quence.
To replace a programmed track, press
MEMORY until the position number of the
track you want to replace appears. Then
repeat Steps 3 and 4 to select and store
the new track.
Erasing a Programmed
Sequence
You can do any of the following to erase
a programmed sequence:
• Press
STOP and MEMORY at the
same time when the CD/CDG player
stops.
• Press
OPEN/CLOSE before or after
programmed play.
•Set
FUNCTION SELECTOR to TAPE
and then back to CD.
CD/CDG CARE TIPS
Although a CD/CDG is very durable, you
should handle it with care. We recom-
mend the following precautions:
• Keep the CD/CDG in its protective
case or sleeve when you are not
playing it.
• Keep the CD/CDG clean. Your local
RadioShack store sells a suitable
CD cleaner kit.
• Do not write on either side of the
CD/CDG, particularly the non-label
side.
• Do not store CD/CDGs in high-tem-
perature, high-humidity locations.
They might warp.
• Keep CD/CDGs dry. A water drop
can act as a lens and affect the laser
beam’s focus.
• Always handle a CD/CDG by the
edges to avoid fingerprints. Finger-
prints and scratches on the CD/
CDG’s surface can prevent the laser
beam from correctly reading the dig-
ital information.
• If a CD/CDG skips during play, it
might be scratched. Your local
RadioShack store sells a Scratch’n
Fix kit (Cat. No. 42-127) that might
stop the skip. Also, see “Trouble-
shooting” on Page 24.
32-1166.fm Page 16 Wednesday, November 17, 1999 4:51 PM