Filter
Top Products
10
Figure 9. CRS-PMIC Pendant Mic/Charger
CRS-PMIC PENDANT MIC/CHARGER FEATURES
The CRS-PMIC Pendant Microphone can be used as a wireless microphone itself or as an IR Transmitter
when used with the Lapel or Headset Mics.
26. MIC INPUT – One, 3.5mm mini jack connects to the mini plug on either the CRS Lapel Mic or
Headset Mic. When either is connected to this jack, it overrides the Pendant Microphone, so only
the Lapel Mic or Headset Mic will be active.
27. CLIP – Clips the Pendant Mic on to the included lanyard or a coat or shirt pocket for use as a hands
free microphone.
28. BATTERY DOOR – Removable battery door for access to the AA re-chargeable Lithium battery. A
regular alkaline battery can be used if necessary, but will not last as long as the Lithium (approx. 4
hours).
NOTE: THE PENDANT IS ALSO A CHARGER. DO NOT CONNECT THE CHARGER POWER
SUPPLY WHEN USING NON-RECHARGEABLE BATTERIES!
29. IR OUTPUT ARRAY – High output IR LED’s output audio as infrared pulses in an omni-directional
pattern that are received by the CRS-IRS IR Sensors. The IR Sensors output electrical DC pulses to
the CRS-CASE which converts them back to audio signals, amplifies them and outputs the audio to
the Speakers.
30. MICROPHONE – The Pendant Microphone is located at the top of the Pendant.
31. ON LED – One LED illuminates green to indicate that the microphone is ON.
32. ON/OFF SWITCH – Turns the Pendant ON/OFF.
33. 6V DC IN – One 3.5mm mini jack connects to the included CRS-PENCH Charger Power Supply for
re-charging the Lithium battery. (Charging Time: 3 Hours).
NOTE: THE PENDANT IS ALSO A CHARGER. DO NOT CONNECT THE CHARGER POWER
SUPPLY WHEN USING NON-RECHARGEABLE BATTERIES!