Panasonic AG-HMX100E Music Mixer User Manual


 
38
Basic Operation
Fade
Fade is an effect of gradually erasing images or decreasing
the sound level (fade-out) or gradually displaying images
or increasing the sound level (fade-in).
The following diagram shows an example of fade-out.
Fade is executed with the FADE execution button.
1
Set the fading method in the [FADE] submenu
of the [DSK FADE] menu ( page Vol.2-11).
2
Set the FADE transition time (from fading start
to end) ( “To set the FADE transition time” on
this page).
3
Press the FADE execution button.
The button is lighted, and ashes during fade-out.
4
Press the FADE execution button again.
The button goes off and fade-in is executed.
To synchronize the audio faders to the
transition lever
Press the AUDIO FOLLOW VIDEO button to turn on.
To set the FADE transition time
The currently set FADE transition time (FADE TIME) is
shown in the area where the event number, transition time,
pattern number, and internal video are displayed on the
setting screen (
page 20).
The factory default setting is [02:00f] (2 seconds).
1
Press the FADE setting button to turn on.
2
Set the FADE transition time by entering a
numeric value with the numeric keys or using
the TIME rotary control.
Example: To set “2:05” (2 seconds 5 frames),
enter “2.5.”
The [SYSTEM1] submenu of the [SETUP] menu can
be used to select the transition time display form
“seconds+frames” or “frames” (
page Vol.2-26).
3
Press the key.