Filter
Top Products
41
Specifications
[VIDEO INPUT/OUTPUT]
Analog composite input
(VIDEO IN):
BNC x 2 sets, 1.0 V[p-p], 75 Ω termination
SDI input: BNC x 4 sets
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
HDMI input: HDMI connector x 2 sets (Type A connector), incompatible with HDCP
DVI-I input: TMDS single link (incompatible with HDCP), compatible with digital/analog RGB
External sync signal input
(G/L):
BNC x 2 (with loop-through), 1.0 V[p-p], 75 Ω auto termination
Analog composite signal (NTSC/PAL)
Program (PGM) output: SDI x 1
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
DVI-D x 1, TMDS single link (incompatible with HDCP)
3D mode: L-channel signal for MODE1, SIDE BY SIDE signal for MODE2
Preview (PVW) output: SDI x 1
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
AUX output: SDI x 1
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
MULTI VIEW output: SDI x 1
SD serial digital signal: Complying with SMPTE259M-C and ITU-R BT.656-4 standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
DVI-D x 1, TMDS single link (incompatible with HDCP)
3D mode: R-channel signal for MODE1, SIDE BY SIDE signal for MODE2
Advanced reference output
(ADV-REF):
BNC x 1, 75 Ω
Analog composite signal
Sync: 0.286 V[p-p] (NTSC)/0.3 V[p-p] (PAL)
Burst: 0.286 V[p-p] (NTSC)/0.3 V[p-p] (PAL)
[AUDIO INPUT/OUTPUT]
Audio input (AUDIO IN): XLR: 4 sets (pair of L and R), +4/0/–3 dBu switchable, balanced, 10 kΩ
SDI (Embedded Audio): 4 sets
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
HDMI (Embedded Audio): 2 sets, TypeA connector (incompatible with HDCP)
AUX input:
Pin jack 1 set (pair of L and R), –10 dBV, high impedance, unbalanced
Microphone input (MIC):
M6 x 1, –60 dBV, 2 kΩ, monaural, unbalanced
Audio output (AUDIO OUT):
Program (PGM) output:
XLR 1 set (pair of L and R), +4/0/–3 dBu switchable, low impedance, balanced
SDI x 1 (Embedded Audio)
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
Pin jack 1 set (pair of L and R), –10 dBV, low impedance, unbalanced
Preview (PVW) output: SDI x 1 (Embedded Audio)
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
AUX output: SDI x 1 (Embedded Audio)
SD serial digital signal: Complying with SMPTE259M-C/272M-A and ITU-R BT.656-4
standards
HD serial digital signal: Complying with SMPTE292M/296M/299M standards
Headphones output
(PHONES):
M6 x 1, 8 Ω, stereo, unbalanced, –∞ dBu to –20 dBu