Filter
Top Products
53
[Setup] initial setting screen
The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the
settings are acceptable, enter them using [Enter], and return to the direct pattern settings.
Example of transition
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E
10:00F 3015 Wht
Direct Pattern Setup
Transition Enter to EXIT
Modify
Effects
Off
Comp Off
Pattern
Edge Hard
Width
0
Color
White
If the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will not
be stored in the memory.
The settings of six key patterns and seven transitions patterns are stored in the memory. The edges and effects of each of
the patterns are also stored.
Example of key pattern
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E 10:00F 3002 Wht
Direct Pattern Setup
Key Enter to EXIT
Pattern
Edge
Effects
Off
Light
On
Crop
A
2
8
12
7
12
3D
Modify
Rotate
0
Amp
16
Time
16
TransF
32
Hard
Width
0
Color
White
K Level
255
Key patterns 3xxx, 4xxx and 5xxx as well as key learn patterns 9000 to 9019 can be assigned to key patterns. Transition
patterns 0xxx, 1xxx and 2xxx can be assigned to transitions.
The factory settings are the patterns displayed.
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
6
A