Filter
Top Products
p.2
Specifications
X-Monitor owner’s manual
+0/-1dB 20Hz–20kHz ref 1kHz—any input to any output
any output <.01%
THD 20Hz–20kHz @ +15dBu out
mic ein better-than -128dBu 20Hz–20kHz—150ohm source,60dB gain
channel mute >80dB channel routing >80dB
channel fader attenuation >90dB aux send attenuation >75dB
< +/- 30 degrees,
20Hz–20kHz—mic-in to main-out
mic-in
XLR 4k ohm balanced—max voltage gain to group balanced out=98dB
line-in
TRS >10k ohms balanced
left/right/mono—group,aux,matrix—monitor-out
all 100 ohms balanced
headphones to drive > eight-ohms
send 50 ohms ground-compensated on
TRS jack
return >10k ohms balanced on
TRS jack
+4dBu max level
+26dBu balanced into >1k ohms
high freq +/- 15dB shelf at
12kHz
hi-mid freq +/- 15dB bell freq range 400Hz–8kHz,Q=1.5
low-mid freq +/- 15dB bell freq range
80Hz–2kHz,Q=1.5
low freq +/- 15dB bell-boost/shelf-cut freq center
80Hz,Q=.7 on boost
high-pass filter -12dB/octave freq range
20Hz–400Hz
separate on-switches for eq and high-pass filter
five-band eq on all main outputs high-pass filter:-12dB/octave freq range
20Hz–400Hz
separate on-switches for eq and high-pass filter
five-segment
LED ladder with VU-type response—displays pre-fader signal level
top red-
LED warns of impending overload anywhere within the channel
fourteen mechanical
VU-type meters with LED illumination
twelve-meters showing group-out
two dedicated solo-meters
pink-noise generator can feed the talk-back section
chassis is powder-coated
14-gauge galvanized steel with internal-bracing
modules are powder-coated
18-gauge galvanized steel with baked-epoxy screening
see dimension-drawing
five-years
frequency response
THD
noise
crosstalk
phase shift
inputs
outputs
insert
nominal output level
input channel eq
output features
channel metering
master metering
signal generator
construction
dimensions and weights
warranty