Filter
Top Products
9
En
English
8 AUTO LOOP (MOVE GRID) control
! Turn:
Changes the width of the loop playback section.
! Press:
Turns loop playback on and off.
! [SHIFT] + turn:
Moves the beat grid position.
! [SHIFT] + press:
Switches loop playback on/off.
9 DECK buttons
TRAKTOR PRO 2
a HOT CUE/DELETE buttons
TRAKTOR PRO 2
b KEYLOCK (TEMPO RANGE) button
! Press:
Turns the key lock function on and off.
! [SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time this
is pressed.
c VINYL (PULSE MODE) button
! Press:
This switches the [VINYL] mode on/off.
! [SHIFT] + press:
Switches the jog dials’ illumination mode (Pulse Mode).
d TEMPO slider
Adjusts the playing speed.
e SYNC (MASTER) button
! Press:
Synchronizes to the master deck’s tempo.
! [SHIFT] + press:
Sets the master deck for synchronization.
f Jog dial
! Scratch
When the [VINYL] mode is turned on and the jog dial is turned
while pressing on its top, the track is played according to the
direction and speed at which the jog dial is turned.
! Pitch bend
The playing speed can be adjusted by turning the outer part of
the jog dial during playback.
The top of the jog dial has an embedded switch. Do not place objects
on the jog dial or subject it to strong forces. Also note that water or
other liquids getting into the set will lead to malfunction.
g SAMPLER button
TRAKTOR PRO 2
h SAMPLE VOL control
TRAKTOR PRO 2
i MASTER VOL control
Adjusts the sound level output from the master.
j AUX/MIC VOL control
Adjusts the audio output level of the [AUX IN] and [MIC] terminals.
k GAIN controls
Adjust the sound level input to the various decks.
l FUNCTION (REC) button
! Press:
Loads the track selected with the cursor into the preview player
and plays it.
m HEADPHONES MIX control
Adjusts the balance of the monitor volume between the sound of the
deck whose [CUE
] button is pressed and the master sound.
n HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
o EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
p CUE (Headphones cue buttons)
Use this to monitor the sound of the respective decks over the
headphones.
q Channel faders
Adjust the sound level output from the various decks.
r Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
s CONTROL dial
Changes the balance between the effect sound and original sound.
t Effect parameter controls
These adjust the effects’ parameters.
! [SHIFT] + turn:
Selects the type of effect.
With TRAKTOR LE 2, [FX1-1] and [FX2-1] can be used, with
[FX1-1] fixed to deck A, [FX2-1] fixed to deck B. [FX1-2], [FX1-3],
[FX2-2] and [FX2-3] cannot be used.
u FILTER control
! Turns clockwise to apply the high pass filter.
! Turns counterclockwise to apply the low pass filter.
v FX ON button
TRAKTOR PRO 2
w Effect parameter buttons
These switch the effects on and off.
x Effect assign buttons
TRAKTOR PRO 2
y F1 control
TRAKTOR PRO 2
z F2 button
TRAKTOR PRO 2
A F3 button
TRAKTOR PRO 2