Filter
Top Products
This is where you select the programs on the D Station Rack, set the MIDI transmit
and receive channels, set the various utility functions and store newly edited pro-
grams.
NOTE: When editing a program, the current position of a knob or
switch will probably be totally different to that of the program selected,
so when you turn a rotary control more than a few degrees or move a
switch expect the sound parameter to “jump” to the new value.
Data Entry Keypad - Buttons
The 12 buttons of the calculator style ‘Data Entry’ keypad are used to
call up and set the various operating parameters of each ‘Mode’. You
can use two methods to enter a number :
1. DIGIT INPUT - using the buttons 0 to 9.
NOTE: this must always be a two digit entry, for example :
Selecting program sound 8 —— press the ‘0’ and ‘8’ buttons - display reads ‘08’.
Selecting program sound 17 —- press the ‘1’ and ‘7’ buttons - display reads ‘17’.
2. INCREMENT/DECREMENT - using the ‘-’ and ‘+’ buttons.
Press the ‘+’ button to move up to the next program or value.
Press the ‘-’ button to move down to the next program or value.
These buttons can also be used to ‘scroll’ through values by pressing and holding down until the desired value is reached.
Data Entry/Program
Keypad
8